SX-600-1003

Software

Please use the webinterface or telnet for the configuration.

Firmware

For the firmware update please use the "TFTP" command (: Start>run>"cmd")
•  The command looks like this: (firmware is saved at C:Temp) C:Temp>tftp -i [IP address of the device] put [firmware file] [password]
example: C:Temp>tftp -i 169.254.111.111 put cts124.bin access

Version Update Content
Firmware File
1.19d  20.09.2011  The latest firmware 
Release notes 1.19d SX-600   20.09.2011   
 
Title Update Content
Manual  09.10.2008  Manual 
Wireless Configuration Example via telnet  18.06.2009  Wireless Configuration Example via telnet 
special bridge configuration settings  08.02.2010   
console commands  check link  check link 
SX-600 Setup WPA/WPA2 via webinterface  03.03.2012  SX-600 Setup WPA/WPA2 via webinterface 
 

More Information

Downloads

  • No Downloads found at this time.