SX-3000EDM - the SX-3000GB is also available as OEM product
With the SX-3000EDM, silex technology is introducing the next generation of USB device servers. Network your USB devices with even more data throughput and higher compatibility. 2 USB ports are available. Using a USB hub up to 15 simultaneous USB connections are possible.
It turns your USB devices into network resources. When a USB device is connected through the USB Device Server, it can be used by any network user as though it were locally connected.
Printing, scanning, faxing, storage (NTFS and FAT), listening to music, synchronising iPhone with iTunes, securing software with USB dongles – all functions become available over the network. The integration of USB devices into virtual environments - VMWare, Citrix, Hyper-V etc. - is also supported.
Of course, the SX-3000EDM is also compatibel with 10/100 Base-TX networks.
Silex also o ffers the SX-Virtual Link SDK for Windows or Macintosh, which allows you to design your own custom utility for connection to the USB device over the network. Please contact us for more information on this.
It turns your USB devices into network resources. When a USB device is connected through the USB Device Server, it can be used by any network user as though it were locally connected.
Printing, scanning, faxing, storage (NTFS and FAT), listening to music, synchronising iPhone with iTunes, securing software with USB dongles – all functions become available over the network. The integration of USB devices into virtual environments - VMWare, Citrix, Hyper-V etc. - is also supported.
Of course, the SX-3000EDM is also compatibel with 10/100 Base-TX networks.
Silex also o ffers the SX-Virtual Link SDK for Windows or Macintosh, which allows you to design your own custom utility for connection to the USB device over the network. Please contact us for more information on this.
SX-3000EDM Dimensions in mm
Technical description:
- Supported Operating Systems: Windows 7/Vista/XP, Server 2008/2003, Mac OS X v.10.3-10.6
- Device Interfaces: 2x USB 2.0 Hi-Speed, one with a 4 times the current supply provided by a conventional USB port (up to 2000 mA)
- Using an optional USB hub, a max. of 15 USB connections are possible
- Network Interfaces: 10/100/1000 Mbps (auto-detect)
- USB Device Server and Print Server in one device
- Compatible with the current printer protocols IPP (Internet Printing Protocol), LPR (Line Printer Remote protocol), RAW and GDI (Graphics Device Interface)
- Particular security due to IP address filter
- Compatible with NTFS and FAT formatted memory
Hardware:
- 250 Mhz ARM9 based SoC
- 256Mbit DDR memory
- 32Mbit Flash memory
- On board Gigabit PHY
- High Speed USB Host Controller 480Mbps
- Built in RJ45 connector with gigabit Ethernet support
- Single 3.3v power operation
- Complete Silex proprietary embedded OS
- A tact switch that can be programmed for reset, trigger, GPIO
SX-3000EDM Header Pin-Out
| Pin No. | Pin Name | Pin Type | Description |
| 1 | VCC | Power | 3.3V power source to the module (max 900mA) |
| 2 | USB_DP0 | In/Out | Host USB connector 0 signal positive |
| 3 | USB_DN0 | In/Out | Host USB connector 0 signal negative |
| 4 | GND | Ground | |
| 5 | NC | In/Out | Reserved |
| 6 | NC | In/Out | Reserved |
| 7 | GND | Ground | |
| 8 | USB_DN1 | In/Out | Host USB connector 1 signal negative |
| 9 | USB_DP1 | In/Out | Host USB connector 0 signal positive |
| 10 | GND | Ground | |
| 11 | GPIOA30 | In/Out | General purpose I/O |
| 12 | GPIOA3 | In/Out | General purpose I/O |
| 13 | GPIOA29 | In/Out | General purpose I/O |
| 14 | GPIOA31 | In/Out | General purpose I/O |
Datasheet for SX-3000EDM
Datasheet for SX-3000EDM
Deutsch
English